Corona Treater
We are a leading Manufacturer of fts 5000 br corona treaters, fts 6000 series corona treaters, fts 650(printing) corona treater, fts 3000 (printing) corona treaters, fts 1000 (printing) corona treaters and non conductive film corona treater from Mumbai, India.FTS 5000 BR Corona Treaters
Product Price :Get Latest Price
GeneratorElectrical Input Requirements: 415VAC | 3Phase | 50Hz | 15 Amps.
Output Power: 6000 Watts.
Output Frequency: 20–40 Khz.
System with MMI Display: Delta Make.
TransformerMOC: MS Powder Coated.
Output Voltage: 10 KVolts.
Interlocks: Spark Gap Interlock which trips the Generator when the Discharge Station High Voltage Wire Breaks during Operation.
Cooling: Transformer Oil
Safety InterlocksZero Speed System: In case the Guide or Main Roller stops moving , the Generator Trips.
Spark Protection: In case of Spark in the Electrodes, the Generator will Trip.
Phase Protection: In the Event of any Phase Failure, the Generator will Switch Off Completely
Discharge Station Door Open Interlock: When the Door Opens, the Generator will trip.
No Corona Interlock: In case of No Corona, A Visual/Audio Indication will be given.
Pneumatic Operated Split Box AssemblyElectrodes: Roller covered with Silicone Sleeves and driven Externally by AC Motor.
Treating Rollers: 200 mm Diameter SS 304 Roller with External Drive Arrangement with Complete Motor and Drive Synchronised with Speed of Machine.
Guide Rollers: 75mm rollers for Entry & Exit of Film.
Ozone Extraction SystemMotors: 5 HP | 3 Phase | 415 V.
Inlet: 2 x 75mm.
Outlet: 100mm.
AccessoriesCables: As per Installation Requirements.
Dyne Level Pens: 44 Dynes Disposable Pen.
Note: Design and Specifications are subjected to change without prior notice.
FTS 6000 Series Corona Treaters
Product Price :Get Latest Price
Specification SheetTreatment Width: 1700mm.
Roller Width: 1800mm.
Line Speed: 80 meters per minute.
Dyne Level: 42-44 Dynes/cm.
No of Sides: Double.
Substrate: HDPE, LDPE, LLDPE and PP.
Gauge: 40-100 microns.
GeneratorElectrical Input Requirements: 415VAC | 3Phase | 50Hz | 15 Amps.
Output Power: 4000 Watts.
Output Frequency: 20–40 Khz.
PLC System with MMI Display: Unitronics or Equivalent.
TransformerMOC: Aluminium.
Output Voltage: 10 K Volts.
Interlocks: Spark Gap Interlock which trips the Generator when the Discharge Station High Voltage Wire Breaks during Operation.
Cooling: Transformer Oil [IS 335] | Quantity : 50 Litres
Discharge StationElectrodes: Fin Type Electrode / Key Type*.
Main Rollers: Two 100mm Rollers covered with Pure Dielectric Silicon Sleeve.
Pneumatic Cylinder: 40mm Bore x 80 mm Stroke.
Safety InterlocksZero Speed System: In case the Guide or Main Roller stops moving , the Generator Trips.
Spark Protection: In case of Spark in the Electrodes, the Generator will Trip.
Phase Protection: Phase Protection In the Event of any Phase Failure, the Generator will Switch Off Completely.
Discharge Station Door Open Interlock: When the Door Opens, the Generator will trip.
No Corona Interlock: In case of No Corona, A Visual / Audio Indication will be given.
Ozone Extraction SystemMotors: 3 HP | 3 Phase | 415 V | 15 Amps.
Suction Capacity: 600 CFM.
Pressure: 16”.
Inlet: 2 x 50mm.
Outlet: 75mm.
AccessoriesGuide Rollers: Two 75 mm Dynamically Balanced Aluminium Rollers
Cables: As per Installation Requirements.
Dyne Level Pens: 42 Dynes Disposable Pen.
Note: Design and Specifications are subjected to change without prior notice.
FTS 650(Printing) Corona Treater
Product Price :Get Latest Price
Product Details:| Features | No scope for errors Reliable results Low maintenance |
We have achieved paramount success in manufacturing and supplying of FTS 650(Printing) Corona Treater. We have used our skilled professionals in the manufacturing of this FTS 650(Printing) Corona Treater. We offer this product to our customers at a very affordable price along with assorted specifications and utmost quality as well.
Features:
- No scope for errors
- Reliable results
- Low maintenance
FTS 3000 (Printing) Corona Treaters
Product Price :Get Latest Price
Specification SheetTreatment Width: 1500mm.
Roller Width: 1600mm.
Line Speed: 80 meters per minute.
Dyne Level: 38 Dynes/cm.
No of Sides: Double.
Substrate: HDPE, LDPE, LLDPE and PP.
Gauge: 40-100 microns.
GeneratorElectrical Input Requirements: 415VAC | 3Phase | 50Hz | 15 Amps.
Output Power: 3000 Watts.
Output Frequency: 20–40 Khz.
System with MMI Display: Schneider or Equivalent
TransformerMOC: Aluminium.
Output Voltage: 10 K Volts.
Interlocks: Spark Gap Interlock which trips the Generator when the Discharge Station High Voltage Wire Breaks during Operation.
Cooling: Transformer Oil [IS 335] | Quantity : 25 Litres
Pneumatic Operated Split Box AssemblyElectrodes: SS Pipe Type Electrode/ Key Type.
Treating Rollers: Two 100mm Rollers covered with Pure Dielectric Silicon Sleeve.
Guide Rollers: Two 75mm rollers for Entry & Exit of Film.
Safety InterlocksZero Speed System: In case the Guide or Main Roller stops moving , the Generator Trips.
Spark Protection: In case of Spark in the Electrodes, the Generator will Trip.
Phase Protection: In the Event of any Phase Failure, the Generator will Switch Off Completely
Discharge Station Door Open Interlock: When the Door Opens, the Generator will trip.
No Corona Interlock: In case of No Corona, A Visual / Audio Indication will be given.
Ozone Extraction SystemMotors: 3 HP | 3 Phase | 415 V | 15 Amps.
Suction Capacity: 600 CFM.
Pressure: 12”.
Inlet: 2 x 50mm.
Outlet: 75mm.
AccessoriesCables: As per Installation Requirements.
Dyne Level Pens: 38 Dynes Disposable Pen.
Note: Design and Specifications are subjected to change without prior notice.
FTS 1000 (Printing) Corona Treaters
Product Price :Get Latest Price
Product Details:| GENERATOR Output Power | 1000 Watts |
Specification Sheet
Treatment Width: 1050mm.
Roller Width: 1100mm.
Line Speed: 40 meters per minute.
Dyne Level: 38 Dynes/cm.
No of Sides: Double.
Substrate: HDPE, LDPE, LLDPE and PP.
Gauge: 40-100 microns.
GeneratorElectrical Input Requirements: 230VAC | Single Phase | 50Hz | 5 Amps.
Output Power: 1000 Watts.
Output Frequency: 20–40 Khz.
TransformerMOC: Aluminium Powder Coated.
Output Voltage: 10 K Volts.
Interlocks: Spark Gap Interlock which trips the Generator when the Discharge Station High Voltage Wire Breaks during Operation.
Cooling: Transformer Oil [IS 335] | Quantity : 20 Litres
Pneumatic Operated Split Box AssemblyElectrodes: SS Pipe Type Electrode/ Key Type.
Treating Rollers: Two 75mm Rollers covered with Pure Dielectric Silicon Sleeve.
Guide Rollers: Two 50mm rollers for Entry & Exit of Film.
Safety InterlocksZero Speed System: In case the Guide or Main Roller stops moving , the Generator Trips.
Spark Protection: In case of Spark in the Electrodes, the Generator will Trip.
Phase Protection: NA
Discharge Station Door Open Interlock: When the Door Opens, the Generator will trip.
No Corona Interlock: In case of No Corona, A Visual / Audio Indication will be given.
Ozone Extraction SystemMotors: 2 HP | 3 Phase | 415 V | 15 Amps.
Suction Capacity: 500 CFM.
Pressure: 12”.
Inlet: 2 x 50mm.
Outlet: 75mm.
AccessoriesCables: As per Installation Requirements.
Dyne Level Pens: 38 Dynes Disposable Pen.
Note: Design and Specifications are subjected to change without prior notice.
Non Conductive Film Corona Treater
Product Price :Get Latest Price
In the field of manufacturing and supplying, our company offers supreme quality Non Conductive Film Corona Treater. This product manufactured by our company is wear resistant and is highly reliable in terms of the quality aspect. Our machines are made up of finest of the raw materials and are available at extremely feasible prices in the market at present.Features:
- Extended durability
- Fine on performance
- Long operational life
FTS 7000 Series Corona Treater
Product Price :Get Latest Price
In the field of manufacturing and supplying, our company offers supreme quality FTS 7000 Series.
Specification Sheet
Treatment Width: 2100mm.
Roller Width: 2200mm.
Line Speed: 80 meters per minute.
Dyne Level: 44 Dynes/cm.
No of Sides: Double.
Substrate: HDPE, LDPE, LLDPE and PP.
Gauge: Unitronics or Equivalent.
GeneratorElectrical Input Requirements: 415VAC | 3Phase | 50Hz | 15 Amps.
Output Power: 5000 Watts.
Output Frequency: 20–40 Khz.
System with MMI Display: Unitronics or Equivalent
TransformerMOC: Aluminium.
Output Voltage: 10 K Volts.
Interlocks: Spark Gap Interlock which trips the Generator when the Discharge Station High Voltage Wire Breaks during Operation.
Cooling: Transformer Oil [IS 335] | Quantity : 50 Litres
Discharge StationElectrodes: Fin Type Electrode.
Main Rollers: Two 125mm rollers covered with Pure Dielectric Silicon Sleeves with external Bearings
Pneumatic Cylinder: Two 100mm Rollers for Entry & Exit of Film.
Safety InterlocksZero Speed System: In case the Guide or Main Roller stops moving , the Generator Trips.
Spark Protection: In case of Spark in the Electrodes, the Generator will Trip.
Phase Protection: In the Event of any Phase Failure, the Generator will Switch Off Completely
Discharge Station Door Open Interlock: When the Door Opens, the Generator will trip.
No Corona Interlock: In case of No Corona, A Visual / Audio Indication will be given.
Ozone Extraction SystemMotors: 5 HP | 3 Phase | 415 V | 15 Amps.
Suction Capacity: 900 CFM.
Inlet: 2 x 75mm.
Outlet: 75mm.
AccessoriesCables: As per Installation Requirements.
Dyne Level Pens: 42 Dynes Disposable Pen.
Note: Design and Specifications are subjected to change without prior notice.
It comes under into Corona Treater
Explore More Products
Aslam Moolji (Director)
Mumbai - 400016, Maharashtra, India
© Arshad Electronics Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited